CC207S pool heat pump controller (Turcotte TTi ECOLO 50) · Works · Source available

Reverse engineered a CC207S pool heat pump controller for ESPHome with Claude

View JSON

Who did what

None of the 21 commits credits an AI. Many tools add no credit, so this does not show the AI was not used.

Counted from the public git history on 16 Nov 2026. How

What was done

The README says the work and write-up were produced with AI assistance from Claude. The ESP32 reads the controller's data line and decodes the bus, tested on a Turcotte TTi ECOLO 50.

This ESPHome package gives local control of a pool heat pump built around the CC207S-V2.0 controller (Guangdong Chico Electronic), found in Turcotte TTi and Hayward-type units. The README says the write-up and work were produced with AI assistance from Claude.

How it was done

An ESP32 connects to the data line between the controller and the keypad and decodes the telemetry. The README says it was reverse engineered on a Turcotte TTi ECOLO 50 in Quebec, and it reports an unknown_bits_detected sensor for any bit the decode has never seen. The README warns about wiring a mains-powered unit.

Results

The 50-file repository has English and French READMEs and the ESPHome files. It has no vendor firmware.

Discussion

Your library

Sources

Sources reviewed · Added

An AI model drafted this entry from the sources above. An automated check matched its claims against them on 16 Nov 2026. The figures are the author's. How entries are checked. Something wrong? Tell me.