{
  "api_version": "1.0.0",
  "slug": "cc207s-pool-heat-pump-esphome-claude",
  "url": "https://reversedwithai.com/p/cc207s-pool-heat-pump-esphome-claude",
  "markdown_url": "https://reversedwithai.com/p/cc207s-pool-heat-pump-esphome-claude.md",
  "json_url": "https://reversedwithai.com/p/cc207s-pool-heat-pump-esphome-claude.json",
  "title": "Reverse engineered a CC207S pool heat pump controller for ESPHome with Claude",
  "tagline": "Local control of a pool heat pump from a decoded controller bus.",
  "summary": "The README says the work and write-up were produced with AI assistance from Claude. The ESP32 reads the controller's data line and decodes the bus, tested on a Turcotte TTi ECOLO 50.",
  "target": {
    "name": "CC207S pool heat pump controller (Turcotte TTi ECOLO 50)",
    "type": "firmware",
    "type_label": "Firmware and hardware"
  },
  "platform": "ESP32, ESPHome, Home Assistant",
  "models": [
    "Claude"
  ],
  "tools": [
    "ESPHome",
    "ESP32"
  ],
  "outcome": "works",
  "outcome_label": "Works",
  "human_effort": null,
  "time_spent": null,
  "cost": null,
  "license": null,
  "checks": {
    "source_available": "yes",
    "repro_steps": null,
    "real_hardware": null,
    "independently_verified": null
  },
  "author": {
    "name": "fpitre75",
    "url": "https://github.com/fpitre75"
  },
  "sources": {
    "repository": "https://github.com/fpitre75/esphome-cc207s-pool-heatpump",
    "writeup": null,
    "discussions": [],
    "all": [
      "https://github.com/fpitre75/esphome-cc207s-pool-heatpump"
    ]
  },
  "image": null,
  "commit_history": {
    "commits": 21,
    "ai_commits": 0,
    "ai_days": 0,
    "first_ai_commit": null,
    "last_ai_commit": null,
    "credited_models": []
  },
  "added_at": "2026-11-16T10:44:45.158467+00:00",
  "updated_at": "2026-11-16T10:44:45.158467+00:00",
  "sources_reviewed_at": "2026-11-16T10:44:45.158467+00:00",
  "reviewed_by": "automated",
  "human_notes": null,
  "reproduce": null,
  "body_md": "This ESPHome package gives local control of a pool heat pump built around the CC207S-V2.0 controller (Guangdong Chico Electronic), found in Turcotte TTi and Hayward-type units. The README says the write-up and work were produced with AI assistance from Claude.\n\n### How it was done\n\nAn ESP32 connects to the data line between the controller and the keypad and decodes the telemetry. The README says it was reverse engineered on a Turcotte TTi ECOLO 50 in Quebec, and it reports an unknown_bits_detected sensor for any bit the decode has never seen. The README warns about wiring a mains-powered unit.\n\n### Results\n\nThe 50-file repository has English and French READMEs and the ESPHome files. It has no vendor firmware.",
  "ai_use_excerpts": null
}
