Renpho ES-SNG01 Smart Nutrition Scale · Works · Source available

Renpho ES-SNG01 food scale Bluetooth protocol for Home Assistant, decoded with Claude

by lapelotanodobla RepositorySave and follow0 views
View JSON

Who did what

“Co-Authored-By: Claude Opus 5.5 <[email protected]>”
github.com, checked 20 Nov 2026

Only one hardware revision was tested, as the README states.

What was done

PROTOCOL.md records the 55 AA frame format confirmed on a real scale on 2026-11-19, and all 8 commits carry Claude Opus 5.5 trailers and Claude-Session lines.

The integration connects Home Assistant to the Renpho ES-SNG01 Smart Nutrition Scale (hardware revision N3, FCC ID 2A26P-ESSNG01N3) over Bluetooth or an ESPHome proxy, with no cloud and no vendor app. It exposes live weight, last settled weight, tare, display unit, a keep-connected switch and battery.

PROTOCOL.md says the protocol was confirmed on the real scale on 2026-11-19: the scale uses Renpho's own 55 AA frame format (command, length, payload, sum byte), sends no weight in its advertisement, needs a GATT connection and has no handshake. The checksum was checked on all 349 captured frames. The notes also mark the firmware update service as never to be written to. Capture logs used for tests are in tests/fixtures.

All 8 commits carry Claude Opus 5.5 co-author trailers. The README says it was tested only on revision N3 and asks for captures from older revisions, which may use a different chip and protocol.

Try it

setup

Add the repository to HACS as a custom integration, switch the scale on and accept the discovered device in Home Assistant 2026.1 or newer.

Discussion

Your library

Sources

Sources reviewed · Added

An AI model drafted this entry from the sources above. An automated check matched its claims against them on 20 Nov 2026. The figures are the author's. How entries are checked. Something wrong? Tell me.