<!-- Canonical page: https://reversedwithai.com/p/renpho-es-sng01-smart-nutrition-scale-ebb36718 -->
Canonical page: https://reversedwithai.com/p/renpho-es-sng01-smart-nutrition-scale-ebb36718

# Renpho ES-SNG01 food scale Bluetooth protocol for Home Assistant, decoded with Claude

> A local Bluetooth Home Assistant integration for the Renpho ES-SNG01 scale, with the protocol documented.

PROTOCOL.md records the 55 AA frame format confirmed on a real scale on 2026-11-19, and all 8 commits carry Claude Opus 5.5 trailers and Claude-Session lines.

## Key facts

- Target: Renpho ES-SNG01 Smart Nutrition Scale
- Category: Firmware and hardware
- Platform: Home Assistant
- Models: Claude Opus 5.5
- Tools: Home Assistant, Bluetooth LE
- Outcome: Works
- Checks: Source available: yes; Repro steps: not reported; Real hardware: not reported; Verified by others: not reported
- Author: lapelotanodobla
- Added: 2026-11-20
- Updated: 2026-11-20
- Sources reviewed: 2026-11-20 (automated reviewer)

## What was done

The integration connects Home Assistant to the Renpho ES-SNG01 Smart Nutrition Scale (hardware revision N3, FCC ID 2A26P-ESSNG01N3) over Bluetooth or an ESPHome proxy, with no cloud and no vendor app. It exposes live weight, last settled weight, tare, display unit, a keep-connected switch and battery.

PROTOCOL.md says the protocol was confirmed on the real scale on 2026-11-19: the scale uses Renpho's own 55 AA frame format (command, length, payload, sum byte), sends no weight in its advertisement, needs a GATT connection and has no handshake. The checksum was checked on all 349 captured frames. The notes also mark the firmware update service as never to be written to. Capture logs used for tests are in tests/fixtures.

All 8 commits carry Claude Opus 5.5 co-author trailers. The README says it was tested only on revision N3 and asks for captures from older revisions, which may use a different chip and protocol.

## Human work and limitations

Only one hardware revision was tested, as the README states.

## Reproduce it

Add the repository to HACS as a custom integration, switch the scale on and accept the discovered device in Home Assistant 2026.1 or newer.

## AI use in the original source

- "Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>" ([source](https://github.com/lapelotanodobla/ha-renpho-food-scale/commits.atom))

Excerpts checked against the source on 2026-11-20.

## Sources

- [Repository](https://github.com/lapelotanodobla/ha-renpho-food-scale)

Figures are reported by the author and not measured by this site, except the commit history. Entry drafted with AI from the linked sources and checked against them.

Cite as: lapelotanodobla (2026). Renpho ES-SNG01 food scale Bluetooth protocol for Home Assistant, decoded with Claude. Reversed with AI. https://reversedwithai.com/p/renpho-es-sng01-smart-nutrition-scale-ebb36718
