<!-- Canonical page: https://reversedwithai.com/p/neat-adf-scanner-usb-protocol-home-assistant-claude -->
Canonical page: https://reversedwithai.com/p/neat-adf-scanner-usb-protocol-home-assistant-claude

# Reverse engineered the Neat ADF scanner USB protocol for Home Assistant with Claude

> A Home Assistant integration for a Neat scanner whose protocol was decoded from a USB capture.

The README says the proprietary Neat protocol, absent from SANE, was reverse engineered from a USB capture of the Windows driver. All 20 commits carry Claude Sonnet 5.5 trailers.

## Key facts

- Target: Neat ADF scanner (USB 1f44:0050)
- Category: Firmware and hardware
- Platform: Home Assistant, USB/IP
- Models: Claude Sonnet 5.5
- Tools: Home Assistant, USB/IP, USB capture
- Outcome: Works
- Checks: Source available: yes; Repro steps: not reported; Real hardware: not reported; Verified by others: not reported
- Author: [skyu0221](https://github.com/skyu0221)
- Added: 2026-11-20
- Updated: 2026-11-20
- Sources reviewed: 2026-11-20 (automated reviewer)

## What was done

This Home Assistant integration drives the Neat ADF scanner (USB 1f44:0050) shared over the network with USBAnywhere or a standard usbipd server. The README says the Neat protocol is proprietary and not in SANE, and was reverse engineered from a USB capture of the Windows driver. The result is written up in docs/PROTOCOL.md.

### How it was done

All 20 commits carry a Claude Sonnet 5.5 co-author trailer. The repository holds the integration and documentation and no vendor driver files.

### Results

The README reports scanning verified on real hardware at 300 and 600 dpi in colour, plus derived modes, with double-sided scanning, scanner-button events and paper and cover sensors. It notes that the 300 dpi scan programs contain the shading tables of the author's own unit, and gives steps to capture calibration values for another scanner.

## Sources

- [Repository](https://github.com/skyu0221/ha-neat-scanner)

Figures are reported by the author and not measured by this site, except the commit history. Entry drafted with AI from the linked sources and checked against them.

Cite as: skyu0221 (2026). Reverse engineered the Neat ADF scanner USB protocol for Home Assistant with Claude. Reversed with AI. https://reversedwithai.com/p/neat-adf-scanner-usb-protocol-home-assistant-claude
