<!-- Canonical page: https://reversedwithai.com/p/j1x0-card-printer-usb-protocol-python-claude -->
Canonical page: https://reversedwithai.com/p/j1x0-card-printer-usb-protocol-python-claude

# Reverse engineered the J1x0 card printer protocol for a Python driver with Claude

> A Python driver for card printers, with the USB protocol worked out using Claude.

The README says the print protocol was reverse engineered from the vendor's Windows driver. 30 of 31 commits carry Claude Sonnet 5.5 trailers.

## Key facts

- Target: NBS Javelin J1x0 card printers
- Category: Firmware and hardware
- Platform: Python, USB
- Models: Claude Sonnet 5.5
- Tools: Python, Inkscape
- Outcome: Works
- Checks: Source available: yes; Repro steps: not reported; Real hardware: not reported; Verified by others: not reported
- Author: [TeaEngineering](https://github.com/TeaEngineering)
- Added: 2026-11-16
- Updated: 2026-11-16
- Sources reviewed: 2026-11-16 (automated reviewer)

## What was done

j1x0-cardprinter prints cards on J100i, J110i and J120i card printers over raw USB without a Windows driver. The README says the print protocol was reverse engineered from the vendor's Windows driver, and 30 of 31 commits carry a Claude Sonnet 5.5 co-author trailer.

### How it was done

The user designs a card in Inkscape with tokens in the text, and the Python tool fills them and sends the job to the printer. It runs from the command line or a small local web page.

### Results

The status is alpha. Printing works on a J110i with firmware V1.18.25 and a YMCKO ribbon. A macOS build is released, and the package is on PyPI.

## What the commit history shows

30 of 31 commits in the public repository credit an AI, over 2 days between 2026-11-12 and 2026-11-13. Credited: Claude Sonnet 5.5 (30).

Measured by this site from public git history.

## Sources

- [Repository](https://github.com/TeaEngineering/j1x0-cardprinter)

Figures are reported by the author and not measured by this site, except the commit history. Entry drafted with AI from the linked sources and checked against them.

Cite as: TeaEngineering (2026). Reverse engineered the J1x0 card printer protocol for a Python driver with Claude. Reversed with AI. https://reversedwithai.com/p/j1x0-card-printer-usb-protocol-python-claude
