<!-- Canonical page: https://reversedwithai.com/p/evdance-level-2-charger-home-assistant-claude -->
Canonical page: https://reversedwithai.com/p/evdance-level-2-charger-home-assistant-claude

# Controlling an EVDANCE Level 2 charger from Home Assistant after reversing its MQTT protocol with Claude

> A HACS integration for ACT4002UA2 and rebadged chargers.

ha-evdance is a Home Assistant integration for EVDANCE Wi-Fi chargers. The README says the protocol was reverse engineered from an on-network MQTT capture, and Claude trailers appear on 3 of 8 commits.

## Key facts

- Target: EVDANCE Level 2 EV charger (ACT4002UA2)
- Category: Firmware and hardware
- Platform: Home Assistant (HACS)
- Models: Claude Opus 4.8
- Tools: MQTT, Home Assistant
- Outcome: Works
- Checks: Source available: yes; Repro steps: not reported; Real hardware: not reported; Verified by others: not reported
- Author: mbriney
- Added: 2026-11-16
- Updated: 2026-11-16
- Sources reviewed: 2026-11-16 (automated reviewer)

## What was done

The integration monitors power and current and controls the EVDANCE charger on the ycc platform.

### How it was done

The README says the protocol was reverse engineered from an on-network MQTT capture. Claude Opus 4.8 is named as co-author on 3 commits, and CLAUDE.md is present.

### Results

The repository has 20 files and no vendor firmware.

## What the commit history shows

3 of 8 commits in the public repository credit an AI, over 1 day between 2026-11-07 and 2026-11-07. Credited: Claude Opus 4.8 (3).

Measured by this site from public git history.

## Sources

- [Repository](https://github.com/mbriney/ha-evdance)

Figures are reported by the author and not measured by this site, except the commit history. Entry drafted with AI from the linked sources and checked against them.

Cite as: mbriney (2026). Controlling an EVDANCE Level 2 charger from Home Assistant after reversing its MQTT protocol with Claude. Reversed with AI. https://reversedwithai.com/p/evdance-level-2-charger-home-assistant-claude
